Nanopool review 2026: fees, payouts, coins, servers, who it fits
Nanopool is worth a look if you mine Monero, Ethereum Classic or other GPU coins and want a low published fee: 1% with PPLNS payouts. It is not a pool for bitcoin, and several details, such as minimum payouts per coin and restricted countries, could not be confirmed on the official pages we were able to open.
POOL BTC is an independent comparison site for mining pools and the services miners use. We are not Nanopool and not a mining pool, and nothing here is investment advice. A caution before the details: when we checked on 2026-11-11, the Nanopool help center answered with a Cloudflare challenge and the main site showed a maintenance notice. We did not try to bypass that. So part of the numbers below comes from search snippets of the official help center and from the public repository of Nanopool's own miner, and we say so each time.
What is Nanopool?
Nanopool is a mining pool for GPU-friendly coins. Its public configuration examples cover Ethereum Classic (ETC), Monero (XMR), Ravencoin (RVN), Ergo (ERG), Conflux (CFX), EthereumPoW (ETHW) and Zephyr (ZEPH). Bitcoin does not appear in any of them, so if your goal is BTC with an ASIC, look elsewhere.
The company also develops the miner nanominer. By default nanominer connects to pools on nanopool.org, which makes the pool a natural first stop for anyone who already runs that software. Supported software listed on the pool site also includes T-Rex, Avermore, NBMiner and SRBMiner-Multi.
Our own pool table lists only ETC, RVN and ERG for Nanopool. The official configs show more coins, so the table is incomplete and we will extend it once the site is reachable again.
How much does Nanopool charge, and what are the payout limits?
For Monero the official help center page says the fee is 1%, the scheme is PPLNS with a two-hour window, and the payout fee is up to 0.0001 XMR. Payouts go out several times a day. We saw this only in a search snippet dated 2026-11-11, because the page itself did not open.
| Item | What we found | Status |
|---|---|---|
| Pool fee, XMR | 1% | Official help center snippet |
| Scheme, XMR | PPLNS, 2-hour window | Official help center snippet |
| Payout fee, XMR | Up to 0.0001 XMR | Official help center snippet |
| Payout frequency, XMR | Several times a day | Official help center snippet |
| Fee for ETC, RVN, ERG and other coins | 1% in our site data, checked 2026-11-02 | Not re-confirmed on 2026-11-11 |
| Minimum payout, ETC | 1 ETC by default in our data, adjustable from 0.1 to 100 in an earlier article of ours | Not re-confirmed |
| Minimum payout, other coins | Not stated on the official pages we could open (checked 2026-11-11) | Unknown |
A third-party review lists minimum payout ranges for several coins, but it is undated, so we do not use its numbers.
Is the miner fee the same as the pool fee?
No, and this trips people up. Nanominer has its own developer fee, taken inside the miner: 1% on Etchash and Ethash, 2% on KawPow and RandomX, 2.5% on Autolykos, collected once every two hours. That is separate from the 1% pool fee. If you run nanominer on RandomX, your total overhead is therefore higher than the pool fee alone. Other miners have their own fees, so compare them before blaming the pool for a lower payout.
Who is Nanopool for, and who should skip it?
It fits people who mine Monero, ETC, Ravencoin, Ergo or similar coins on GPUs or CPUs, who are happy with PPLNS. PPLNS pays by your share of recent work, so luck and pool size affect day-to-day income.
It fits less well in four cases. You want to mine bitcoin: there is no BTC here. You need a fixed minimum payout you can plan around: we could not confirm one per coin. You need a published list of supported and restricted countries: we found none. Or you want a pool whose help pages are reliably open: during our check they were not.
Which countries can use Nanopool?
Not stated on the official pages we could open (checked 2026-11-11). We found no published list of restricted countries, and nothing about Russia, other CIS countries or Latin America, including Argentina. Mining pools usually need only a wallet address and a worker name, and the site describes a start with a wallet, a worker name and an optional email, but that is not the same as a legal guarantee in your country.
Before you start, check the local rules for mining and for receiving crypto where you live. If you are in Russia, our article on the mining ban in Moscow and the Moscow region shows how regional rules can change quickly. The pool's terms may also change, so read them on the day you connect.
Is Nanopool safe? Security and custody
The pool holds your unpaid balance until the next payout, and you do not control it in the meantime. That is true of every pool, and the way to limit it is to set a sensible payout threshold and use your own wallet address.
What we could not verify: any published security audit, any incident history, two-factor options and whether KYC is ever requested. The pool site describes a start with a wallet and a worker name, with email optional. We have not seen any statement about withdrawal holds or account freezes.
Practical habits that cost nothing: use a wallet address you control and not an exchange deposit address if you can, leave the optional email empty if you do not need it, and check the payout history after the first few days instead of after a month.
How do I start mining on Nanopool?
You need a wallet for the coin you mine, a worker name and mining software that supports the pool. The steps below use only what the official sources state.
- Pick a coin and create a wallet address for it.
- Install a supported miner. Nanominer, T-Rex, Avermore, NBMiner and SRBMiner-Multi are listed on the pool site.
- Choose a server near you. The nanominer README shows hosts such as etc-eu1.nanopool.org:19999, with eu2, us-east1, us-west1, asia1, jp1 and au1 variants, xmr-eu1.nanopool.org:14433 for Monero, rvn-eu1.nanopool.org:12433 for Ravencoin, ergo-eu1.nanopool.org:11433 for Ergo, cfx-eu1.nanopool.org:17433 for Conflux, ethw-eu1.nanopool.org:15433 for EthereumPoW and zeph-eu1.nanopool.org:10943 for Zephyr.
- Enter your wallet address and a worker name in the miner config. Nanominer tries an SSL connection first by default.
- Start the miner and watch the hashrate on the pool page for your wallet.
- Estimate returns with our mining calculator before you buy hardware or pay for power.
Which port is right for ETC?
There is a conflict. The nanominer README gives etc-eu1.nanopool.org:19999, while our earlier ETC pool article lists etc-eu1.nanopool.org:10100 with SSL on 10143. We could not settle it, because the official help pages were closed to us. Use the port that your miner's current documentation and the pool dashboard show, and test the connection before leaving a rig unattended. For more on ETC pools, see our ETC pool comparison.
What are the risks?
The main one is plain uncertainty. Part of the pool's documentation was not reachable during our check, so some numbers could change or be out of date. Coin-specific fees and minimum payouts need to be read on the pool page for your own coin before you commit.
Other risks are ordinary for any pool. PPLNS income varies with pool luck. A coin's price can fall faster than your payout arrives. Small coins can have thin demand. Finally, the miner's own fee and your electricity cost decide whether you earn anything, and the pool fee is only a small part of that.
How does Nanopool compare with 2Miners, HeroMiners and Kryptex?
All three alternatives are in our pool table. The figures below come from that table, with fee checks dated 2026-11-09, and they are not re-verified for this article. Nanopool's row uses our table dated 2026-11-02 plus the notes above.
| Pool | Fee in our table | Scheme | Minimum payout | Main coins |
|---|---|---|---|---|
| Nanopool | 1% | PPLNS | 1 ETC | ETC, RVN, ERG, plus XMR, CFX, ETHW, ZEPH in configs |
| 2Miners | 1% | PPLNS | 0.1 ETC | KAS, ETC, RVN, ERG |
| HeroMiners | 0.9% | PROP | 0.01 ETC | KAS, ERG, RVN, ETC |
| Kryptex Pool | 3% for BTC, 1% for ETC, KAS, RVN | PPS+ | 0.001 BTC | BTC, KAS, RVN, ETC |
On paper the fee gap between these pools is small, a tenth of a percent in one case. The bigger differences are the scheme (PPLNS against PROP against PPS+), the minimum payout and whether the pool has a bitcoin option. If you want a lower ETC threshold, 2Miners and HeroMiners look better in our table. If you want BTC, Kryptex is the only one of the four with it. Read our reviews of 2Miners, HeroMiners and Kryptex Pool for the details.
FAQ
Does Nanopool support bitcoin?
No. The coins in the official configs we saw are ETC, XMR, RVN, ERG, CFX, ETHW and ZEPH. BTC is not mentioned. For bitcoin mining, use a pool built for SHA-256, and compare options in our pool table.
What is the Nanopool fee?
The official help center snippet for Monero says 1%. Our site data also shows 1% for ETC, RVN and ERG, checked on 2026-11-02. We could not re-confirm fees for other coins on 2026-11-11, so check the page for your coin.
What is the minimum payout?
It depends on the coin and may be adjustable. Our data shows 1 ETC by default, with a range of 0.1 to 100 in an earlier article. For other coins it is not stated on the official pages we could open (checked 2026-11-11).
Is the nanominer fee the same as the pool fee?
No. Nanominer takes its own developer fee of 1% to 2.5%, depending on the algorithm, once every two hours. The pool charges its fee separately. You pay both if you use that miner.
Can I use Nanopool from Russia or Argentina?
We found no published country restrictions and no statement about Russia, the CIS or Argentina (checked 2026-11-11). Registration appears to need only a wallet and worker name. Check local law and the pool's terms before you start.
Is there KYC?
Not stated on the official pages we could open (checked 2026-11-11). The pool site describes starting with a wallet and a worker name, with email optional, and mentions no identity check.



