POOL BTC
Language
BTC / ETH / LTC / BCH / DOGE / курсы обновляются в реальном времени
Mining pools ranking 2026

Best Bitcoin mining pools in 2026

Bitcoin mining pool ranking by net BTC per day: fee, payout scheme (FPPS, PPS+, PPLNS) and latency, plus a mining profit calculator that accounts for pool fees. No paid placements, transparent methodology.

What POOL BTC is

POOL BTC is an independent website that compares bitcoin mining pools. We are not a pool. We compare 26 pools, 21 of them for BTC, by fee (BTC pools charge from 0% for solo pools to 5%; Tpool 0.9%, AntPool, ViaBTC and F2Pool 4%), payout scheme (FPPS, PPS+, PPLNS) and minimum payout.

Every figure comes from the pool's own pages and carries its check date (18 August to 9 September 2026). The calculator below shows net income with your own electricity price and the pool fee.

Bitcoin mining tools

Data center with mining equipment

Hashrate Control

Monitor hashrate, profitability and hardware load in one dashboard.

Crypto market analytics dashboard

Crypto Intelligence

Live top-coin rates with dynamic mining profitability insights.

Analytics dashboard with charts and metrics

Pool Fee Analytics

Compare pool commissions and see net profitability after pool fees.

Bitcoin mining profit calculator 2026

Profitability by pool for your hashrate and fees

ASIC miner profitability calculator: enter your hashrate to compare net BTC per day across all pools after fees

Your hashrate
Power per hour

Формула BTC: (ваш H / H сети) × 144 × 3,125.

Хешрейт сети: 1000+ EH/s.

Курс BTC: загрузка....

Hashrate Distribution by Pool

    Data: mempool.space

    Top Bitcoin pools by net profitability

    Top Bitcoin pools by net profitability

    Bitcoin mining pools compared: fee, payout model, minimum payout (verified 2026-11-09)
    PoolFeePayout modelMin payoutCoins
    Tpool0.9%FPPS0.0001 BTCBTC, FB, BCH, LTC, DOGE, ZEC
    Headframe0.9%FPPS0.001 BTCBTC, LTC, DOGE, ZEC
    Trustpool1%PPS+0.001 BTCBTC, LTC, BCH, DASH, KAS, DOGE
    NiceHash2%RTPPS0.00001 BTCBTC
    Luxor2.5%FPPS0.001 BTCBTC, LTC
    Promminer3%FPPS0.0001 BTCBTC, LTC, DOGE
    Kryptex Pool3%PPS+0.001 BTCBTC, KAS, RVN, ETC
    AntPool4%FPPS / PPS / PPLNS0.005 BTCBTC, BCH, LTC, ETC, KAS
    ViaBTC4%PPS+ / PPLNS0.0001 BTCBTC, BCH, LTC, ETC, DASH, ZEC, KAS
    F2Pool4%FPPS / PPLNS0.005 BTCBTC, LTC, ETC, KAS
    EMCDBTC 4%; BCH, LTC, DOGE, DASH, ETC, KAS, FB, PEP, ZEC 1.5%FPPS0.0001 BTCBTC, BCH, LTC, DOGE, DASH, ETC, KAS, FB, PEP, ZEC
    CloverPool4%FPPS0.005 BTCBTC, BCH, ETC, LTC, DOGE, KAS, FB
    Foundry USAundisclosedFPPS0.01 BTCBTC
    BitFuFu PoolundisclosedFPPS0.005 BTCBTC
    Public Pool0%SOLO / PPLNSn/aBTC
    Braiins Solo0.5%SOLOn/aBTC
    AtlasPool1.5%SOLOn/aBTC
    CKPool Solo2%SOLOn/aBTC
    SoloPool.com2%SOLO / Prop / Solo Splitn/aBTC
    SupportXMR0.6%PPLNS0.3 XMRXMR
    HeroMiners0.9%PROP0.01 ETCKAS, ERG, RVN, ETC
    WoolyPooly0.9%PPLNS0.1 ETCKAS, ETC, RVN, ERG
    2Miners1%PPLNS0.1 ETCKAS, ETC, RVN, ERG
    Nanopool1%PPLNS1 ETCETC, RVN, ERG

    Other Bitcoin mining pools

    Other Bitcoin mining pools

    Altcoin pools

    Altcoin pools

    Пулы без BTC вынесены отдельно.

    Fresh from the blog

    Updated: November 18, 2026

    Guides: choosing a pool and counting income

    Pool selection FAQ

    What criteria matter when choosing a mining pool?

    Key criteria: payout scheme (PPS/FPPS/PPLNS), pool fee, reliability and reputation, server location (ping), pool size (share of hashrate), minimum payout threshold, support for your algorithms and coins. Trustpool and F2Pool lead on the combination of these for Bitcoin mining in 2026.

    How do PPS, FPPS and PPLNS payout methods differ?

    PPS (Pay Per Share) guarantees fixed pay per share regardless of block finds. FPPS adds a share of transaction fees to PPS, so it usually pays more than PPS. PPLNS (Pay Per Last N Shares) pays shares only in found blocks - more volatile but can pay more with steady mining.

    How to compare real profitability across mining pools?

    Run the same rigs on different pools for 7-14 days, considering full picture: base fee, stale share rate, payout speed and cost, ping stability. Compare estimated vs actual returns using calculators. ViaBTC and Trustpool typically show the smallest forecast gaps.

    What is a mining pool and why use one?

    A mining pool is a service that combines miners’ hashrate to mine together and distribute rewards proportionally. It is needed because Bitcoin’s difficulty (network hashrate above 1,000 EH/s in October 2026) makes solo mining uneconomical - one ASIC might search for a block for years, while in a pool it earns steady daily income.

    Which pools are most profitable for Bitcoin mining in 2026?

    Trustpool offers a strong mix of fees, flexible payout schemes (FPPS/PPLNS), and minimal gap between estimated and actual returns. AntPool is best for Antminer owners with Bitmain integration. F2Pool suits analytics-focused miners with flexible PPS/PPLNS. ViaBTC for multi-coin mining.

    How does ping to the pool affect mining profitability?

    Ping directly affects the stale share rate - solutions that arrive late and are not counted. Each percent of stale shares cuts earnings by the same amount. Optimal ping is under 50 ms; higher ping raises the stale share rate and cuts earnings. The effect is smaller for Bitcoin’s 10-minute blocks and critical for 1-second chains like Kaspa.

    How to minimize rejected (stale) shares when mining on a pool?

    Use a geographically close pool server, stable wired connection instead of Wi-Fi, and a dedicated IP with mining traffic prioritized. Set optimal share difficulty for your hashrate. Update ASIC firmware or mining software to support Stratum V2, which cuts network traffic by about 20% and speeds up share handling.

    What is pool hashrate and why does it matter?

    Pool hashrate is the combined hashing power of all its miners, in hashes per second. It determines block frequency: a pool with 10% of Bitcoin’s hashrate finds about 14-15 blocks per day. An ideal pool has 5-20% of the network - enough for steady payouts without centralization risks.

    What should miners in Russia consider when choosing a pool?

    Low latency to servers (European pools), convenient deposit/withdrawal (Trustpool, ViaBTC and EMCD offer local options), language support (EMCD and ViaBTC have Russian support), and legal aspects (pools that do not require verification for small amounts are often preferred).

    How do I connect a miner to a pool?

    Create an account on the chosen pool, add a worker with a unique name, and find the Stratum address of the nearest server. In your ASIC or GPU mining software settings, enter this address, worker name and password (often just «x»). After saving and restarting, hashrate should appear in the pool stats within 5-10 minutes.

    Can you mine on multiple pools at once?

    Yes, it is not only possible but recommended for risk diversification. Modern software lets you split hashrate between pools in a set ratio or auto-switch to the most profitable. For ASICs like Antminer S21 you can use custom firmware with multi-pool support.

    How to switch from one pool to another without losing income?

    First withdraw all available balance from the old pool (above minimum). Then move 10-20% of hashrate to the new pool for 24-48 hours and check stability and earnings. After that, move the rest. When switching from PPS to PPLNS, allow for a delay before full efficiency.

    Should you choose a pool only by fee size?

    No, that is a common mistake. A pool with a low fee (1%) but high rejected-share rate (3%) can be less profitable than one with 2% fee and 0.5% rejects. Also consider reliability, server location, payout scheme and extra services.

    How important is the payout scheme when choosing a pool?

    The scheme is critical and should match your strategy. PPS gives stable income regardless of pool luck, ideal for beginners. FPPS adds transaction fees. PPLNS can pay more with steady long-term mining but with higher variance.

    Which pool is best for Antminer S21 or WhatsMiner M60?

    Antminer S21 works best with AntPool thanks to Bitmain software and firmware. For WhatsMiner M60 (SHA-256), F2Pool offers good compatibility.

    What matters more when choosing a pool - size or stability?

    For most miners, stability matters more than size. A mid-size pool (5-10% of network hashrate) with a solid track record is better than a huge but unstable one. For PPS, income stability evens out within 2-3 days. Connection quality, support and policy transparency matter more.

    Can different pools give different profitability with the same hashrate?

    Yes, the gap can reach 10-15% due to block-finding efficiency, how tx fees are shared, server location, protocol implementation and hardware-specific optimizations. MEV (miner extractable value) - the pool’s ability to optimize which transactions go into a block - also matters.

    Визуал хешрейта и майнинга