How to Start Bitcoin Mining in 2026: A Beginner's Guide in 8 Steps

Updated: 2026-11-13

Start with the math, not the hardware: what does your kilowatt-hour cost, and will the machine pay back? Our calculation on Hashrate Index data from 9 Nov 2026 puts an Antminer S21 Pro at $1,778 at about 602 days to payback at $0.05/kWh. At $0.08/kWh it barely pays back (4,188 days), and at $0.12/kWh it never does. The break-even rate is about $0.085/kWh. After that come coin, hardware, location, wallet, pool, setup and taxes. If step 1 comes out negative, stop there.

Step 1. Will mining pay at your electricity rate?

It pays if your rate is below roughly $0.085 per kWh. At $0.05 an Antminer S21 Pro (234 TH/s, 15 W/TH) earns back its $1,778 price in about 602 days, at $0.08 it barely pays back, and at $0.12 it loses money. This is our calculation on Hashrate Index data from 9 Nov 2026.

Payback is one fraction: device price divided by daily net income after power and pool fee. Hashprice on 9 Nov 2026 was $31.89 per PH per day (a week earlier $32.82, source). An S21 Pro earns $7.46 a day gross and $7.16 after a 4% pool fee. At 84.24 kWh per day, power costs $4.21 at $0.05, $6.74 at $0.08 and $10.11 at $0.12. That leaves a net gain of $2.95 and $0.42 a day for the first two rates, and a loss of $2.94 at $0.12. At a $1,778 price that is 602 days, 4,188 days and no payback.

Assumptions: BTC price of about $74,624 and difficulty stay constant, and wear, hosting and taxes are not counted. Difficulty resets about every two weeks and rose 5.5% to 148.36T on 29 Oct 2026, so leave a margin. You can run your own numbers in the ASIC ROI calculator guide.

Go deeper: miner ranking and calculator.

Step 2. Which coin should you mine with an ASIC?

With an ASIC the choice is almost always Bitcoin (SHA-256). Other algorithms need other machines: Litecoin and Dogecoin use Scrypt, Kaspa uses kHeavyHash. GPUs and CPUs fit a narrow set of coins. Choose by income on your hardware at your rate, not by token price.

For GPUs, compare coins on a live calculator such as WhatToMine, not by rule of thumb.

Go deeper: Litecoin and Dogecoin, Kaspa.

Step 3. What hardware should you buy?

Compare three numbers: hashrate (TH/s), efficiency (W per TH) and price per TH. By spec an Antminer S21 Pro delivers 234 TH/s at 3,510 W, or 15 W/TH. A new one cost from $1,778 to $2,755 on 13 Nov 2026, and the price depends a lot on the seller.

The low end comes from OneMiners; other sellers are collected on ASICMinerValue. Other models such as the S21 XP or Whatsminer M60S++ are listed by resellers at very different prices, so check a current listing. If the miner sits in your home, noise matters.

Go deeper: which ASIC to buy.

Step 4. Should you run it at home or in hosting?

If your home rate is above $0.10/kWh, hosting is usually cheaper. Home is free space but means noise, heat and load on your wiring. Hosting gives you power, cooling and uptime for a rate. In our survey, public hosting rates worldwide run from $0.036 to $0.10 per kWh.

US retail hosting runs from $0.06 to $0.09 (our hosting comparison, Sep 2026; per-provider links are in that article).

Go deeper: hosting comparison.

Step 5. What wallet do you need for payouts?

Create the wallet before you connect anything, because the pool pays to your address. A free open-source desktop wallet such as Sparrow (link checked 13 Nov 2026) is enough to start. Write the seed phrase on paper, never in the cloud or a photo. You can leave payouts on an exchange, but then you depend on its terms.

Many tiny payouts are expensive to move later: one SegWit input at 200 sat/vB costs about 13,600 sats (Spark UTXO Management Guide, 27 Aug 2026).

Go deeper: wallets for miners.

Step 6. Which pool should you choose?

A single machine will almost never find a block alone, so a pool pays you in proportion to your hashrate. Compare payout scheme, fee, payout threshold and availability in your country. F2Pool and ViaBTC both charge 4% for FPPS or PPS+ and 2% for PPLNS.

FPPS and PPS+ pay steadily, PPLNS has variance. BTC fees as checked: F2Pool charges FPPS 4% and PPLNS 2%, with a 0.005 BTC minimum withdrawal (f2pool.com, around 12 Nov 2026). ViaBTC charges PPS+ 4% and PPLNS 2% (viabtc.com/pricing, 13 Nov 2026). Promminer charges 3% for all coins and pays out from 0.0001 BTC (promminer.ru, updated 9 Nov 2026).

Go deeper: pool comparison, how a pool works, solo vs pool.

Step 7. How do you connect the ASIC and set up monitoring?

Plug the miner into Ethernet, open its web panel and enter the pool's stratum URL, a worker name and your address. The worker should show up on the pool dashboard within 15 minutes. Set alerts for hashrate drops and overheating. Do not expect an instant payout, because it depends on the pool's threshold.

Step by step: how to connect an ASIC. At 100 TH/s a 0.005 BTC threshold takes about 117 days and 0.001 BTC about 23 days (our calculation at a hashprice of $31.89 and a BTC price of about $74,624, before pool fees).

Step 8. What about taxes and the law?

Rules are local, so check your country's tax and mining law before you buy. Russia has its own rules, see our guide. Tax treatment of mining income differs by country, and the details change, so confirm them with a local adviser. This is not legal or tax advice.

Go deeper: law and taxes.

A woman in a bright room with a laptop and a payback calculator
Calculate payback at your own rate before buying a device

What does it cost to start?

For one S21 Pro you need from $1,778 for the device plus power: $4.21 a day at $0.05/kWh, $6.74 at $0.08, $10.11 at $0.12. Hosting, a wallet and a pool add their own lines, listed in the table below. There is no fixed figure for outlets, cables and ventilation.

ItemRangeSource and date
ASIC (S21 Pro, new)$1,778 to $2,755OneMiners, ASICMinerValue, 13 Nov 2026
Power at home, S21 Pro$4.21/day at $0.05; $6.74 at $0.08; $10.11 at $0.12our calculation, Hashrate Index 9 Nov 2026
Hosting$0.036 to $0.10 per kWhour hosting comparison, Sep 2026
Hosting setup$30 to $100 per miner at some providerssame comparison
Wallet$0 (Sparrow)github.com/sparrowwallet/sparrow, 13 Nov 2026
Poolfee 2% to 4% (F2Pool and ViaBTC: 4% FPPS or PPS+, 2% PPLNS; Promminer 3%)F2Pool, ViaBTC, Promminer, Nov 2026
Outlet, cables, ventilation, soundproofingdepends on the premises, no fixed figureget an electrician's quote
A technician in a bright hosting hall with miners on racks
Hosting covers power and cooling, at home you have to arrange them yourself

Common beginner mistakes

  1. Buying before checking the rate. At $0.12/kWh even an S21 Pro goes negative in our calculation, and at $0.08 it barely stays above zero.
  2. Using today's difficulty. It changes, and when it rises real payback is later.
  3. Ignoring noise and heat. An ASIC is not a desktop PC.
  4. Keeping the seed phrase in the cloud or a photo. Lose it, lose the coins.
  5. Skipping taxes and registration rules. They vary by country and change.

FAQ

Where should a beginner start with mining?

With payback math at your own electricity rate (step 1). If net income after power is negative, do not buy hardware.

Can I mine with no investment?

Not on your own hardware: you need a machine and power. Cloud mining has its own risks, see cloud mining pros and cons.

How much money do I need?

For one S21 Pro, $1,778 to $2,755 for the device on 13 Nov 2026 (see the table), plus power or hosting.

Which coin should a beginner mine?

With an ASIC the algorithm decides: SHA-256 means Bitcoin. For other algorithms see Litecoin and Dogecoin and Kaspa.

Do I need a pool?

Practically yes: one machine finds blocks too rarely. See solo vs pool.

Can I mine at home?

Often yes, but check local law and your power contract. Russia has its own rules, see our guide.

How do I calculate electricity cost?

Power in kW times 24 times your rate. An S21 Pro draws 3.51 kW by spec, which is 84.24 kWh per day. More in electricity costs.

Sources