WoolyPooly review 2026: fees, payouts, coins, servers, who it fits

WoolyPooly is worth a look if you mine GPU coins such as Ethereum Classic, Kaspa, Ravencoin or Ergo and want a stated fee from 0.9% with PPLNS or SOLO. It is not a bitcoin pool, so ASIC owners who want BTC should look elsewhere. Several details, such as country rules and security audits, are not published.

POOL BTC is an independent comparison site for mining pools and miner services. We are not WoolyPooly and we are not a pool, and nothing here is investment advice. All facts below come from the official WoolyPooly pages, which we read on 13 November 2026. Where a page does not say something, we write that it is not stated, and we do not guess.

What is WoolyPooly?

WoolyPooly is a mining pool for coins that are mined with graphics cards and, for Kaspa, with ASICs. The main page lists 23 coins, including ETHW, ETC, KAS, RVN, ERG, CFX, FIRO, ALPH, RXD, NEXA and ZANO. Bitcoin is not in that list. Our own site files WoolyPooly among its 26 pools, but it is one of the five that do not mine BTC.

The pool connects through a stratum address, and each coin has its own page with a port. Registration is optional: the pool says you can mine straight to your coin wallet address. An account only adds settings such as a custom payout threshold.

How much does WoolyPooly charge and what are the limits?

The official main page says the fee ranges from 0.9% and is taken from block rewards, with no separate transaction fees. The ETC and KAS coin pages both show 0.9% for PPLNS and SOLO. The fee for every other coin is not listed on the main page. The SOLO fee is not stated separately on the official site.

ParameterWhat the official site says
Pool feeFrom 0.9%, taken from block rewards
SchemesModified PPLNS and SOLO, PPS not mentioned
PPLNS window sizeNot stated
Minimum payout ETC0.1
Minimum payout KAS50
Minimum payout RVN5
Minimum payout ERG1
Payout timingAutomatic once the coin minimum is reached, no time schedule, no limit on the number of payouts
DifficultyAutomatic vardiff

Minimums for other coins are on the main page: 0.1 for ETHW, 1 for CFX, 0.1 for FIRO, 1 for ALPH, 500 for RXD and 50000 for NEXA. Check the exact figure for your coin before you connect, because the list is long and can change. Some coins need many confirmations before a block matures. The FAQ gives NEXA as about 5000 confirmations, roughly seven days.

There is one third-party conflict. MiningBoard lists a total of 1% for this pool, while the official site says 0.9%. It may be rounding, but we could not confirm it. The official number is the one we use.

Who is WoolyPooly for and who is it not for?

It suits owners of graphics cards or Kaspa ASICs who mine more than one coin and want to keep one wallet address across them. It also suits people who prefer to start without an account. It does not suit anyone who wants bitcoin payouts, a fixed daily income scheme such as PPS, or published audits and insurance.

A few practical points help decide:

  • You mine ETC, KAS, RVN or ERG and your rig is small: the fee is competitive with the alternatives below.
  • You mine Kaspa with an ASIC: the pool publishes worker suffixes for difficulty and supports dual mining of KAS with ETHW or ETC.
  • You want BTC: use one of the 21 pools in our table that mine it.
  • You need a PPS style payout: the pool does not mention one.

For a rough idea of what your hardware can earn, use our mining calculator. It works for bitcoin, so for GPU coins treat it only as a guide to the structure of the calculation.

A woman on a terrace checking a Kaspa ASIC miner dashboard on a laptop
A Kaspa ASIC miner dashboard shows hashrate and payouts

How are the pool's size and luck?

Numbers on the coin pages change by the minute, so read these as a snapshot from 13 November 2026. On the ETC page the pool showed 5.14 Gh/s, 14 miners online and a network of 182.999 Th/s. The last block was found on 6 November at 200% effort, and two of the 15 recent blocks since 26 August had a reward of 0.

On the Kaspa page the pool showed 123.376 Th/s with 171 miners against a network of 356.064 Ph/s. By our own calculation that is about 0.03% of the network. Effort above 100% means the pool needed more work than average for that block. One 200% block proves nothing, but a small pool will see big swings in luck, and PPLNS income follows luck.

Which countries are supported?

The pool does not publish a list of supported or restricted countries, and it does not mention Russia, CIS countries or Argentina in connection with access. This is not stated on the official site as of 13 November 2026. The terms page we tried returned an error, so we could not read any terms.

What the site does publish is a server list: USA, Europe, Turkey, Brazil, Asia, China and Russia, with Australia on the ETC page. The pool claims average ping does not exceed 100 ms. That is the pool's own claim, and we did not measure it. A Brazil server may help miners in Latin America, but pick the node with the lowest ping from your own rig.

Mining rules also depend on where you live. If you are in Russia, our article on the mining ban in Moscow and the Moscow region shows how regional rules can change quickly.

Is WoolyPooly safe and who holds the funds?

The pool holds your balance until it pays out, as every pool does. The official site does not describe a security audit, two factor login, cold storage or insurance. We state that plainly: not stated on the official site as of 13 November 2026. A stronger setup is to keep the payout threshold low so less sits with the pool.

The privacy policy says the pool collects your IP address, wallet address, browser and device data, approximate location, visited URLs, access time and cookies. It says the pool does not try to identify the owners of wallet addresses, and it mentions no KYC. It refers to GDPR and CCPA.

Account holders can change the payout address only after email confirmation, use one address for all coins and disable payments. The FAQ allows payouts to exchange wallets but recommends only MEXC, Coinex and Tradeogre. Pool pages also show direct payouts to an exchange through Gate.com. We did not find an independent in-depth review of payout reliability. A SourceForge page shows a single user review with a 2.0 out of 5 overall score and 1.0 for support, which is too thin to conclude anything.

A man entering stratum settings next to a GPU mining rig
Stratum settings are entered on the miner side, pick the server by region

How do you start mining on WoolyPooly?

Only steps the official pages support:

  1. Choose a coin from the list on the main page and open its coin page.
  2. Install a miner the pool recommends. For ETC the page names T-Rex for NVIDIA and TeamRedMiner for AMD, and for KAS it names BzMiner and lolMiner.
  3. Copy the stratum address and port from the coin page, for example pool.woolypooly.com:35000 for ETC or pool.woolypooly.com:3112 for KAS.
  4. Use your own coin wallet address as the login and add a worker name. An account is optional.
  5. For a Kaspa ASIC, add the worker suffix that matches your model, such as KS0, KS1, KS3M or KS3L.
  6. Watch the dashboard and confirm the first payout arrives after the coin minimum.

Test with a small rig and a small wallet first. Support is on Telegram, Discord and Reddit, and there is a monitoring bot on Telegram.

What are the risks?

Real risks are these. The pool is small, so luck swings are large. Several security and legal details are unpublished. Fees for most coins are not on the main page. The terms page we tried was not available. SOLO mode can give you nothing for weeks. Coin prices move, and mining a small coin can be unprofitable after power costs.

How does WoolyPooly compare with 2Miners, Nanopool and HeroMiners?

On paper the pools are close. The differences are the scheme, the minimum payout and the choice of coins. Figures below were verified on our site on 9 November 2026, and fees are as each pool published them.

PoolFeeSchemeMinimum ETC payoutCoins in our table
WoolyPoolyFrom 0.9%Modified PPLNS, SOLO0.1KAS, ETC, RVN, ERG and more
2Miners1%PPLNS0.1KAS, ETC, RVN, ERG
Nanopool1%PPLNS1ETC, RVN, ERG
HeroMiners0.9%PROP0.01KAS, ERG, RVN, ETC

Kryptex Pool is the one to look at if you also want BTC: 3% on bitcoin with PPS+ and a 0.001 BTC minimum, and 1% on ETC, KAS and RVN. Read our reviews of 2Miners, Nanopool and HeroMiners. For the payout schemes themselves, see the guide to PPS, FPPS, PPLNS and SOLO.

FAQ

Does WoolyPooly mine bitcoin?

No. Bitcoin is not in the official coin list. The pool is for GPU coins and Kaspa. For BTC choose a pool with BTC support from our comparison table.

What is the WoolyPooly fee?

The main page says it ranges from 0.9%. The ETC and KAS pages show 0.9% for both PPLNS and SOLO. Fees for other coins are not on the main page, and MiningBoard shows 1%, which we could not confirm.

Do I need an account or KYC?

An account is optional, since you can mine directly to a wallet address. The privacy policy mentions no KYC. Whether any country or identity checks apply is not stated on the official site as of 13 November 2026.

Can I use WoolyPooly from Russia or Argentina?

No restrictions for Russia, CIS countries or Argentina are published, and the pool lists servers in Russia and Brazil. The terms page was not available to us, so check the rules yourself before connecting.

What is the minimum payout?

It depends on the coin: 0.1 for ETC, 50 for KAS, 5 for RVN and 1 for ERG. Payouts are automatic after that amount, with no time schedule. With an account you can change the threshold.

Is WoolyPooly safe?

The official site does not mention an audit, 2FA or insurance. It does say wallet owners are not identified and gives a privacy policy. Independent reviews are thin, so start small and keep a low payout threshold.